Chisel subsurface plows SVAROG are designed for deep autumn nonmoldboard tillage with arable horizon deepening.


Cultivation depth up to 450 mm.

Equipped with cogged ripper-pressing wheels. Complete soil cultivation and crumble lumps up to 5 cm.

Tool package-type design. Replacement of worn tool parts instead of whole tools.

Press wheels are cleaned during work by means of scrapers.

The packing wheel is mounted on two bearings. Each bearing has load capacity of 1,800 kg.

Firm and durable design. Increased frame pipe cross-section — 150×100×8.
Racks of tools, equipped with chisels and a pair of undercutting wings. The wings cut into the soil to a pre-set depth. Thus, deep loosening of the soil with a shift of the layer and with drainage is achieved. A set of undercutting wings additionally cuts a layer of soil and raises it, carrying out a more complete loosening. Tilth adjustment and setting is done by means of the support wheels mechanics.
Loosening-packer roller completes the tillage process, grinding the lumps and rolling down the soil.
Today, RZZ produces 4 models of SVAROG chisel plows under the ALMAZ brand:
The models of SVAROG chisel plows differ from each other in width, this is shown by the numerical value — "2,5", "4,5", "6" in the name of the models.
The warranty for chisel subsurface plows produced after January 01, 2018 is 2 years since placed in service.
| Soil cultivation quality indicators | PCh-2,5 | PCh-4,5 | PCh-6 |
| Stubble preservation, (%) | 70% | 70% | 70% |
Chisel Plows SVAROG in operation
download video (ZIP, mp4, 14,7 Mb)