
Seven-furrow reversible plow PERESVET PPO 5/7-35 has always attracted the most attention of agricultural producers. A powerful plow is capable of plowing more than 2 hectares per hour, while plowing is done in a shuttle manner, without idling, which means that fuel is saved.
Mould tillage is widely used throughout the Russian Federation and the CIS, which means that there will always be a need for one-way plows of increased productivity. In the process of finalizing the one-way plow ALMAZ PERESVET PPO 5/7-35, the frame strength was increased several times, the support wheel mounting was improved.
Optional for PPO plows: АМА kicker mouldboards, Italy.
| Coupling method | полунавесной |
| Performance per hour of operation, hectare/h) | 1,89-2,84 |
| Operating speed, km/h | up to 9 |
| Cut width, m | 2,1-2,8 |
| Weight, kg | 3000 |
| Tilling depth, cm | up to 30 |
| Overall dimensions (in operative position), mm | |
| Length | 7600±228 |
| Width | 2900±87 |
| Height | 1700±51 |
| Underframe clearance (left-hand and right-hand bodies), mm | 750±25 |
| Number of tools, pcs | 14 |
| Service life, years | 8 |
| Soil surface ridgeness, not more than (cm) | 3…5 |
| Качество крошения пласта (фракции размером до 5 см), % | 71…75 |
| Заделка растительных и пожнивных остатков, % | 90 |
250-300 hp:
MTZ 2522 DV, Valtra Т 191
John Deere 7930, 8230, 8330
New Holland T 8020, Т 8030
Fend 922 Vario, 924 Vario, 927 Vario
К-5280 АТМ, К-5250 АТМ,
К-701, К-744, К-744Р1
Attention!
Soil characteristics: Specific resistance up to 0.09 MPa (0.9 kg/cm2), hardness up to 3.0 MPa (30kg/cm2), maximum humidity up to 22%, slope up to 8 grades.
Adjustable width of each body. Can be increased from 300 to 400 mm by turning the housing supports.
Modular tools. Replacement of a worn part of the tool instead of the whole tool..
Equipped with fins which perform the function of a coulter and put the soil layer to the bottom of the furrow. The result is a deep and full incorporation of weeds, vegetable and crop residues and layer crumbling.
The reversible plow design saves up to 30% of fuel and time spent on breaking up the stints. No idle runs.
No clogging with vegetable and crop residues. The clearance between the body and the frame is increased from 680 mm to 750 mm.
Improved support wheel mounting. Excludes dynamic shocks when turning the plow.
Durable and reliable design. Frame tube cross-section is increased up to 10 mm. Advanced tool heat treatment technology.
A shear bolt protects the tools from any damage.
Durable and ruggedized polymer coating, high-quality welds.
Five and six-body plows can be easily converted into seven-body ones using additional modules.
ОАО "Пермская Птицефабрика" Пермский край, Пермский район, Далимов Алишер Акрамжонович, начальник цеха, о PERESVET PPO 5/6-35 и 5/7-35:
Сейчас как раз три трактора пашут ими. Поля у нас небольшие, поэтому пришлось снять по одному корпусу. Работают, нареканий нет. Поломок, брака не было.
Сначала были настроены на движение рядом с бороздой, но когда земля влажная, плуг стягивает в нее. Приезжала сервисная служба, настроили для работы в борозде, теперь так работаем.
Агрофирма Красный клин, Республика Башкортостан, Мунир Хакимов, главный инженер, о плуге PERESVET PPO 5/7-35:
Семикорпусный плуг отработал у нас сезон, нареканий никаких не было. Позже приобрели еще один плуг, пятикорпусный.
Азат Абдулхамитович Абайдуллин, директор ООО "Приуралье":
Отзыв о работе плугов PERESVET PPO 5/7-35 ТМ "АЛМАЗ" (pdf, 124 кб).
ООО "Агросоюз", Новосибирская область:
Купили мы у Вас плуг оборотный ППО 5/7-35. особых нареканий нет, приезжали ваши сервисники, адаптировали его под наш Кировец. Потом колеса новые привезли, потому что эти из-за нагрузки не выдержали и резина начала слоиться. Вспахали 450 гектар. Сервисники ребята доброжелательные. Все меняли в срок.