Mounted plow FINIST PLN 8-40^new!

Price request

Eight-furrow mounted plow FINIST PLN 8-40 can be mounted on tractors with power of 300-350 hp: K 744R1, R2, R3 and imported tractors with three-point mounting.

The FINIST basic-mounted plow cuts, loosens, crumbles and wraps the soil layer; helps to improve the penetration of air, water and nutrients to the roots of plants; smells weeds.

Plow performance is higher due to the width of each furrow increased to 400 mm. Total cutting width of the plow is 3.2 m, allowing to plow up to 3.2 ha of the field in one hour. High stand and the hull extended from under the frame eliminate clogging with crop residues, and the wear-resistant tools and high-strength steel used for fabrication of the plow make it a reliable and profitable investment.

There are 3 package options: with coulters, without coulters, with fins. A hitch is optionally purchased for coupling to imported tractors.

Technical Parameters

Coupling method	навесной
Производительность за один час основного времени, га/ч	up to 3,2
Operating speed, km/h	up to 10
Tilling depth, cm	20…30
Конструктивная ширина захвата, не менее, м	3,2
Width захвата корпуса, м	0,4
Body type	культурный
Расстояние от опорной плоскости корпусов до нижней плоскости рамы, мм	750
Number of bodies, pcs	8
Constructive plow weight, kg	2200±66
Габаритные размеры плугов в рабочем положении, мм, не более
— length	7350±221
— width	4150±125
— height	2050±62
Transport speed, km/h	up to 20
Service life, years, не менее	8

Compatibility

300-350 hp:

K 744R1, -744Р1, К-744Р2, К-744Р3 and foreign-made tractors a with three-point European coupling system.

Advantages of the FINIST Share Plows

FINIST PLN 8×40 с предплужниками

FINIST PLN 8×40 с углоснимами

Фото



• 
• 
• 
• 
• 

Video