Subsurface plow
STAVR PG-3^new!

Price request

Subsurface plow STAVR PG-3 is designed for the primary cultivation of fallow lands, autumn tillage with maximum preservation of stubble and other crop residues on the field surface after cereal and hoed forecrop in order to prevent soil aeolation.

STAVR PG-3 is used in steppe areas with insufficient and unstable moisture and soils prone to aeolation.

Advantages of subsurface plow STAVR PG-3:

• Two types of hitches are available: for mounting on Russian and imported tractors.
• Tools consisting of two angled plowshares and chisels perform complete weeding, loosen the soil with maximum stubble preservation.
• Prevents soil aeolation (due to snow retention).
• Plowshares and chisels are coated with hard alloy to improve wear resistance.
• Adjustable tool Adjustable approach (drift) angle when working on solid soils.
• Simple design and adjustment.

Subsurface cutter can work with a slope of the field surface up to 8°, вsoil moisture within 12 – 25% and maximum hardness not exceeding 3.5 MPa (35 kgf/cm²).

Technical Parameters

Coupling method	Навесной
Performance per hour of operation, hectare/h)	не менее 3,2
Tilling depth, cm	15…30
Operating speed, km/h	up to 10
Габаритные размеры, мм
– length	1530±40
– width	3200±90
– height	1952±60
Количество рабочих органов	3
Тип рабочего органа	Стрельчатый
Cut width, m	3,2±0,1
Weight, kg	735±20
Service life, years	8

Compatibility

The plow is coupled with tractors with power of 155-180 hp and drawbar category not less than 3tf.